How to protect the normal operation of the granulator

The main machine of the resin granulator controls the production of the entire equipment. If operated improperly, it can affect the normal operation of the granulator and cause losses to the enterprise. So, how can we protect the normal operation of the twin screw granulator? Mainly starting from the following four aspects.
1. When operating the main machine of the twin screw granulator, specialized personnel should be sent to record and file in detail, so as to refer to maintenance in case of mechanical failure;
2. The main machine of the resin granulator should be equipped with a pressure sensor and a digital display meter, which is convenient for operators to check whether the rotation speed of the main machine is normal;
3. The lubrication oil pressure gauge at the tail of the resin granulator host should be regularly tested to protect the normal operation of the transmission box gears;
4. The main engine and oil pump motor are electrically interlocked, that is, if the oil pump motor does not start, the main motor cannot start; The main motor does not stop, and the oil pump motor cannot stop.
With the rapid development of the times, traditional granulators are no longer able to meet the needs of enterprises. Therefore, it is necessary to make some technological innovations to the new type of granulator, in order to adapt more quickly to the pace of market development and changes in production methods, and significantly improve the production efficiency of granulator enterprises.

Differentiated embodiment of granulator
There are many types of granulators on the market, do you know what differences exist in different types of granulators?
1) The granulator has different quality stability and service life, and is not equipped with a shelf life or after-sales service after leaving the factory. The service life of the granulator is between 2 months and 1 year, with a general wear life of only 6 months. A legitimate granulator is equipped with an after-sales service team for customers.
2) There are also certain differences in the quality of granulators, and there are many types and brands of granulators. There have also been differences in price, as certain factors of the granulator can cause differences in its own price.
3) The configuration standards are different, and in order to pursue low-cost production, many manufacturers also have lower usage standards in material selection. For example, for cylindrical non-standard reducers, 45 # steel is used as the screw material on the market, and 20 # low-carbon steel is used as the barrel material, without any heat treatment process, simplifying the die head. Some brands of granulators are not equipped with motors, electronic control systems, and do not have any safety protection settings. For parts such as the body, lighter and thinner materials are used.